JEEP JK STEERING

Fab Series® Steering for Jeep JK

Individual Parts List

ImageDescriptionReplacesPart #
1.25"-12 Forging with RH Threads 1.25"-12 Forging with RH Threads

1.39" Offset - 12.250" center to end

 TBD RP65790
1.25"-12 Forging with LH Threads 1.25"-12 Forging with LH Threads

1.39" Offset - 12.250" center to end

 TBD RP65791
1.25"-12 Forging with LH Threads 1.25"-12 Forging with LH Threads

Straight - 11.625" center to end

 TBD RP65788
1.25"-12 TPI Forging with Flat and RH Threads 1.25"-12 TPI Forging with Flat and RH Threads

12.500" center to end
Includes Jam Nut

   RP66991
1.25"-12 TPI Forging with tapered hole and RH Threads 1.25"-12 TPI Forging with tapered hole and RH Threads

12.500" center to end
Includes Jam Nut

   RP66003
1.25"-12 Forging with RH Threads 1.25"-12 Forging with RH Threads

Offset - 11.909" center to end

 TBD RP65789
Stud Cartridge - 0.657" Small Taper Stud Cartridge - 0.657" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

 ES3624
ES800594
DS300005 		RP65794
2 2" Impact Socket

For cartridge installation & removal - 1/2" Drive, 6 Point

 RP69248
1.25"-12 TPI Jam Nut with RH Threads 1.25"-12 TPI Jam Nut with RH Threads

1.8125" Wrench Flats

   RP65913
1.25"-12 TPI Jam Nut with LH Threads 1.25"-12 TPI Jam Nut with LH Threads

1.8125" Wrench Flats

   RP65914
1.25"-12 TPI Threaded Insert with RH Threads 1.25"-12 TPI Threaded Insert with RH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

   RP66442
1.25"-12 TPI Threaded Insert with LH Threads 1.25"-12 TPI Threaded Insert with LH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

   RP66443
Serrated Belleville Washer Serrated Belleville Washer

Lock 1.25" jam nuts to the sleeve

 RP66639
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP65794, RP66399, RP66400 cartridges.
NOTE: Not for use on drag link - for tie rod assembly only

   RP66974
1:8 Reamer 1:8 Reamer

1.5 in/ft reamer - Small taper: 0.438", large taper: 0.813"

   RP69226
1:8 Reamer 1:8 Reamer

1.5 in/ft reamer - Small taper: 0.750", large taper: 1.3125"

   RP69293
1:6 Reamer 1:6 Reamer

2.0 in/ft reamer - Small taper: 0.375", large taper: 1.125"

   RP69229
1:10 Reamer 1:10 Reamer

1.2 in/ft reamer (METRIC) - Small taper: 0.437", large taper: 0.887"

   RP69231

TIE ROD ASSEMBLY KIT - RP29419

Where to buy - Buy Now

ImageDescriptionQTY Per KitPart #
1.25"-12 TPI Rod End with RH thread

12.250" center to end

 1 RP65790
1.25"-12 TPI Rod End with LH thread

12.250" center to end

 1 RP65791
Stud Cartridge - 0.657" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

 2 RP65794
1.25"-12 TPI Jam Nut - RH Threads

1.8125" Wrench Flats

 1 RP65913
1.25"-12 TPI Jam Nut - LH Threads

1.8125" Wrench Flats

 1 RP65914
1.25"-12 TPI Threaded Insert - RH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

 1 RP66442
1.25"-12 TPI Threaded Insert - LH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

 1 RP66443
Tie Rod Lockout Washer

prevent your tie rod assembly from twisting down.

How to Install 		2 RP65966
Seal for Lockout Washer 2 RP65369