1.0"-18 THREAD

Parts List

ImageDescriptionReplacesPart #
1.0"-18 TPI Forging with tapered hole and LH Threads 1.0"-18 TPI Forging with tapered hole and LH Threads

12.500" center to end
Includes Jam Nut

   RP66486
1.0"-18 TPI Forging with RH Threads 1.0"-18 TPI Forging with RH Threads

5.750" center to end
Includes Jam Nut

   RP66467
1.0"-18 TPI Forging with LH Threads 1.0"-18 TPI Forging with LH Threads

5.750" center to end
Includes Jam Nut

   RP66468
Stud Cartridge - 0.657" Small Taper Stud Cartridge - 0.657" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

 ES3624
ES800594
DS300005 		RP65794
Stud Cartridge - 0.675" Small Taper - Tie Rod End Stud Cartridge - 0.675" Small Taper - Tie Rod End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

 2010R
2010L
2233L 		RP66399
Stud Cartridge - 0.701" Small Taper Stud Cartridge - 0.701" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

 2018+ JL
Pitman Arm End 		RP66934
Stud Cartridge - 0.715" Small Taper - Pitman Arm End Stud Cartridge - 0.715" Small Taper - Pitman Arm End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

 2026R
2027L 		RP66400
Stud Cartridge - 0.750" Straight Stud Stud Cartridge - 0.750" Straight Stud

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting
For knuckles previously drilled out for heim joints.

 3/4" Heim RP66512
Stud Cartridge - 0.752" Small Taper Stud Cartridge - 0.752" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

 RP69241
2 2" Impact Socket

For cartridge installation & removal - 1/2" Drive, 6 Point

 RP69248
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP65794, RP66399, RP66400 cartridges.
NOTE: Not for use on drag link - for tie rod assembly only

   RP66974
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP66512 cartridge.
NOTE: Not for use on drag link - for tie rod assembly only

How to Install 		  RP66583
Serrated Belleville Washer Serrated Belleville Washer

Lock 1.0" jam nuts to the sleeve

 RP69244
1:8 Reamer 1:8 Reamer

1.5 in/ft reamer - Small taper: 0.438", large taper: 0.813"

   RP69226
1:6 Reamer 1:6 Reamer

2.0 in/ft reamer - Small taper: 0.375", large taper: 1.125"

   RP69229
1:10 Reamer 1:10 Reamer

1.2 in/ft reamer (METRIC) - Small taper: 0.437", large taper: 0.887"

   RP69231